Related Products

Fightlite Industries Mcr Belt Fed Upper Receiver Full Auto

Fightlite Industries Mcr Belt Fed Am Besten Gunstig Receiver Full Auto

'The FightLite Industries MCR Belt Fed AR-15/M16 Upper Receiver allows you to convert your AR-15 or M16 from a standard, magazine fed rifle, into a multi-purpose belt-fed, that can also feed from a magazine. 1-7 twist stabilizes standard, military ammunition, and 1/2-28 muzzle accepts standard muzzle devices. This unique upper receiver includes a Picatinny rail mounted to the top cover, as well as a Picatinny handguard. 16.25"" quick change barrel features a chrome lined bore & chamber. Receiver is machined from 7075-T6 billet & features a Type III matte black anodized finish. 6- Mfg: Fightlite Industries. Simply attach the upper as you would any other, link up your ammunition and go to the range. ...

Price: $4195.00 | Merchant: Brownells | Date: Dec-16, 2017



Kimber Mfg 1911 Auto Best Buy Thumb Safety

Ambidextrous thumb safety includes a unique, captive hammer pin for added support of the right paddle to provide exceptionally smooth, reliable operation. Factory replacement part for Kimber 1911 equipped with an ambidextrous safety. Can also be installed as an upgrade part on Government Model, Commander, and clones. Low-profile pads won't snag on clothing or gear. Mfg: Kimber Mfg. SPECS: Steel, black. 3/16"" (4.8mm) wide x 7/8"" (2.2cm) long left side contact area x 1"" (2.5cm) long right side contact area. Fits Kimber 1911 pistols, Government Model, Commander, and clones. Gunsmith fitting required; may need to be filed for sear clearance.

Price: $59.99 | Merchant: Brownells


Brownells 1911 Auto Mainspring Comparacao Rebuild Kit

Handy kit contains all the parts you need to mount a new mainspring housing on your 1911, or reburish the internal components to factory-new condition. Includes standard, factory weight (23 lb.) hammer spring to help ensure positive ignition and restore your pistol's reliability by replacing an old, weak spring. Also includes mainspring cap, cap pin, and retaining pin, so you don't ruin a good-looking new housing's appearance with old, dinged hardware. Kit available with blued or stainless external components to match your pistol's finish. Installation instructions included. Mfg: Brownells SPECS: Kit contains factory weight hammer spring, mainspring cap, cap pin, mainspring housing retainer pin, and instructions. Fits full-size 1911 Government Model, Commander, and clones.

Price: $8.99 | Merchant: Brownells


Store Ed Brown 1911 Confronto Slide Stop

Made from extra-hard, forged tool steel that works great, without deforming. Gives positive, last-round engagement and tight, long-lasting lockup with custom barrels. Mfg: Ed Brown SPECS: Steel, blued or stainless steel. Pin diameter .200"" (5.08mm) +/- .0005"". Fits 1911 Auto, .45 ACP only.

Price: $59.99 | Merchant: Brownells


Store Harrison Design Amp Consulting 1911 Extreme Service Firing Pin Dettaglio

Highly recommended for both heavy recoiling 1911s and also 1911s with shorter than Gov't Model slides. The Extreme Service firing pin stop is CNC machined out of an oil-quenching tool steel that was chosen for a balance of impact and wear resistance, with a GI hardness is 44-50Rc. The Extreme Service FPS is made .482"" wide so it can be fitted to your slide and extractor to prevent extractor ""clocking"". It has chamfered fitting pads on each side to make your job easier and the FPS fit better into the slide. It has a 3/64"" radius machined on the bottom rear corner and a 3 degree angle at the top rear face, both of which act to take away mechanical advantage from the Mfg: Harrison Design & Consulting

Price: $25.99 | Merchant: Brownells


10 Epargne Performance Llc 1911 Extended Magazine Release

Drop-in replacement for factory magazine catch has a unique, convex button surface to ensure positive finger contact for fast magazine changes under pressure. Crisp, 30 lpi serrations further aid in fumble-free engagement; .045"" longer than factory part for extra leverage without creating an unwanted protrusion that snags on clothing, holster, or other gear. Tumbled and bead-blasted for a uniform, matte finish with rounded ""dehorned"" edges. Interior of the catch is relieved to enable instant magazine free-fall when you hit the button. Available in Carbon Steel with black manganese phosphate finish or natural finish Stainless Steel. Mfg: 10-8 Performance Llc SPECS: Carbon steel, black, or stainless steel, natural silver, both matte finish. Gunsmith fitting may be required.

Price: $35.99 | Merchant: Brownells


Shop Ed Brown 1911 Slide Stop Haut

Fully machined in house by Ed Brown Products from a forging for the ultimate in strength and longevity. Heat treated to perfect hardness for lifetime performance. Features serrated lever, .200 diameter pin, and a built in detent for easy installation. Beautiful chamfered profile. Drops in most 1911's with no fitting. All versions of our forged slide stop are Hardcore and guaranteed for life against breakage. Mfg: Ed Brown

Price: $58.99 | Merchant: Brownells